Quick Details

• Use: Other Trailers

• Place of      Origin: Shandong, China (Mainland)

• Brand Name: CIMC

Specifications

1.High tensil steel 

The tank  trailer is designed for use in stevedoring and transporting of diesel oil.

Dimension:

Length: 11,800 mm

Width: 2,485 mm  (including mud guard)

Height: 3,600mm @ unload

King Pin Location: 1,000 mm from the front face of the front bolster (No confirm).

Axle spacer: 7,400mm 1,400mm

Fifth Wheel Height: 1,280mm with the chassis level (No confirm).

Landing Gear location: 2420mm behind the king pin location

(The above dimension will be adjusted according to the tractor specification. )

 Weight:

 Tare weight(Tolerance 0~-4%) : approximate 10,800KG

Pay Load  :  31,700KG

G..V.W.R  :  42,500KG

King Pin Distribution: 16,750KG

Axle Group Distribution: 26,950KG

 Running Gear

 King Pin:  2 exchangeable king pin, supplier & type: JOST KZ1010.

Landing Gear:  2 speed road side winding with sand shoe. Lifting capacity 23T and static load 72T. Type: JOST A400, left operating.

Suspension:  Single point suspension.16 pieces Springs. Axle Trac:1400mm.

Axles: 150x150 square axle with 15 tons capacity. Brake: S420x180, Wheel fitting 10xM22x1.5 ISO/ PCD335/281. Supplier & type: FUWA. Made in China..

Option Supplier & type: YORK. Made in China. Option by Factory.

Rims:  9.0×22.5, 10 Holes ISO, 8 pieces.

Tires:  12R22.5 , 8 pieces. China Famous Brand. Option by Factory.

Brake System:  Dual air brake system, WABCO relay emergency valve, none ABS brake system

Brake Chamber: 30/30 type on the rear axle, 30 type on the  front axle

Electrical System: 24 volt lighting system with modular wiring harness, 7 pole plug

Tail/Stop light: Red.

Rear turn signal light: amber

License light: white

Side Maker Lamp: Amber.

 Tank:

 Volume:  35000LT 5%, Vapor Volume for semi  trailer

Three compartments: 2350L/20000L/15000L

Plus outside fitted fuel tank 2350L capacity situated inside the main tank at the front of the tank with proper inlet (16" diameter manhole) and outlet (a ball-type discharge valve and a thread coupling, made in CHINA, lies to roadside.).

Tank material: steel plate Q345A, the thickness of the shell is 5mm approx.

Dish ends and bulkhead: dished and flanged, steel plate Q345A, thickness are 5mm approx, and baffles are 4 mm approx,steel plate Q235A.

Shape of tank: Ellipse, double D

Plate dealing: Outer surface paint. Color according to the customers requirement. Internal antistatic coating.

Test pressure designed36kpa.

 Tank Accessories and fitting :

 16" diameter manhole pre compartment.

Each compartment has a 4" foot valve, pneumatic operation.

Each compartment has a 3" steel pipe line.

At the middle of the tank, each compartment with a 3" ball-type discharge valve and a  male coupling (To be determined), lies to roadside.

At the rear of the tank, a detachable ladder is provided.

A chequered plate walkway is installed on top of the tank made of antiskid plate.

Each compartment has a measurement ruler. According to the regulation of Chinese metrology department, the measurement ruler for fuel tanker semitrailer should be calibrated above 70% of the tank volume and below 70% the ruler doesn't need be calibrated. From 70% to 85% of the tank volume, we can calibrated the ruler and it can reach 300 liter/step. And above 85% of the tank volume, we can make the precision of the measurement ruler reach 100 liter/step. (calibrated by CIMC)

Expansion valve: non.

Without Pump

 Others:

 Spare Tire  Carrier: Equipped one set per chassis without spare tire.

Side Guard: Steel material Side Protection.

Extinguisher: Two dry powder fire extinguisher of 8 kg . capacity .

Water Tank: One 20L Water Tank made of plastic for non drinking water.

Tool Box: Equipped one set without tools, Located in rear.

Marking: Qingdao CIMC Special Vehicle Co., Ltd. standard, Technical data plate including chassis no , dead weight , year of manufacturing etc. to be fitted

Painting: Color by customers requirement.

Two external hose carries rectangular shaped with small doors, 5.3 miters long.

Copper earthling bar provided not painted .

To protect tank from accidents, tank rear far end projection is more than 100 mm in front of the rear bumper of the chassis.